Description
We have stock for two type of Temperature Controllers.
Single Tamp Temperature Controllers
- Shimaden Digital Controller (Series SRS11/13/14)
- Yokogawa UT35/UT55A Controller
Program Type Temperature Controllers
- Shimaden Program Controller (Series FP93) – Max of 4 program and 40 segments (max)
- Yokogawa UP35/UP55A Controller
Note 1: Yokogawa UP35A is a program controller with available 4 programs and 40 segments (max.)
Note 2: Yokogawa UP55A is a program controller with available 30 programs and 300 segments (max.)
Shimaden SRS13A
- Multi-input and multi-range performance
- Small instrument depths (62mm – 65mm) save space, thus securing a larger installation area.
- SV setting: 3 points
- PID Value: 3 types
- 2-output heating and cooling control available
- Total 32 steps Program available (optional)
(1-4 pattern, 32-8 step)
- RS-485 Interface available (optional)
(Master – slave function, Modbus/Shimaden Protocol)
- Heater break/heater loop alarm: Single/3-phase available
- A wide selection of additional functions (optional) is available to suit various needs.
Click here for spec. Shimaden SRS11
Shimaden FP93
- Full multi-input and multi-range performance
- User selectable Thermocouple, RTD, V, mV and Current inputs
- A 250 Ohm resistor is required across the input terminal for 4-20mA DC.
- Large 20mm bright display
- Readable from a distance and in a low light area 40-step programs function
- RS232C or RS485 Interface available
- Dust and splash proof front panel equivalent to IP66
Click here for Spec. Shimaden – FP93
Yokogawa UT35/UT55
Overview
The UT55A/UT52A digital indicating controllers employ an easy-to-read, 14-segment large color LCD display, along with navigation keys, thus greatly increasing the monitoring and operating capabilities. A ladder sequence function is included as standard. The short depth of the controller helps save instrument panel space. The UT55A/UT52A also support open networks such as Ethernet communication.
Features
- A 14-segment, active (PV display color changing function) color LCD display is employed. Two five-digit, high-resolution displays are possible. Alphabet letters can be displayed in an easy-to-read manner. The guide display shows parameter names.
- Easy to operate. Navigation keys (SET/ENTER and Up/Down/Left/ Right arrow keys) are employed to facilitate making settings.
- 65 mm depth. The small depth enables the mounting in a thin and small instrumented panel.
- Ladder sequence function is included as standard. This function allows for creating a simple sequence control. Dedicated LL50A Parameter Setting Software (sold separately) allows for performing programming using a ladder
- Various built-in open network functions such as Ethernet are available. Easy connection with various vendors’ PLCs is possible.
- Quick setting function. Setting only the minimum necessary parameters for operation is possible. (For single-loop control only)
- Equipped with a multitude of functions Universal I/O and eight control modes (cascade control, etc) are included as standard. PID control, heating/cooling control, feed forward control, etc. are available.
Click here for spec. Temp Controller_ Yokogawa UT advanced spec
Yokogawa UP35/UP55
Overview
The UP35A/UP55A program controller employs an easy-to-read, 14-segment large color LCD display, along with navigation keys, thus greatly increasing the monitoring and operating capabilities. A ladder sequence function is included as standard. The short depth of the controller helps save instrument panel space. The UP35A /UP55A also support open networks such as Ethernet communication.
Features
- A 14-segment, active (PV display color changing function) color LCD display is employed. Two five-digit, high-resolution displays are possible. Alphabet letters can be displayed in an easy-to-read manner. The guide display shows parameter names.
- Easy to operate. Navigation keys (SET/ENTER and Up/Down/Left/Right arrow keys) are employed to facilitate making settings.
- 65 mm depth. The small depth enables the mounting in a thin and small instrumented panel.
- Ladder sequence function is included as standard. This function allows for creating a simple sequence control. Dedicated LL50A Parameter Setting Software (sold separately) allows for performing programming using a ladder
- Various built-in open network functions such as Ethernet are available. Easy connection with various vendors’ PLCs is possible.
- Quick setting function. Setting only the minimum necessary parameters for operation is possible. (For single-loop control only)
- Equipped with a multitude of functions. Universal I/O and eight control modes (cascade control, etc) are included as standard. PID control, heating/ cooling control, feed forward control, etc. are available.
- LL50A Parameter Setting Software (sold separately) The parameters and ladder programs of UTAdvanced digital indicating controller can be built from a PC using this software. It makes data management even
- Dust-proof and drip-proof. IP66 (for front panel)
Click here for spec. UP35_55
